The DFC packaged air conditioner units are built to perform, with features and options that provide lower installation and operating costs, superior indoor air quality, quiet operation and longevity.
DAIKIN Air Conditioner Package Unit, DFC Series, 4 ton Nominal Capacity, 47000 Btu/hr Cooling, 208/230 V, 33.7 A, 1 hp, 1200 rpm Rotational Speed, 60 Hz, 1 ph Phase, Scroll Compressor, 1570 cfm, 11 EER Rating, 13.4 SEER, 1 Stages, R-410A Refrigerant, Direct Drive, Standard Static Direct Drive Motor, 6.41 sq-ft Coil, 3/4 in Connection, 20 x 25 x 2 in Filter, 50 A Fuse Rating, Steel, Finish: Galvanized/Powder-Painted, 39-7/8 in H x 74 in W x 48-5/16 in D, Additional Information: NPT Connection, 1122 rpm Speed, 23 FPI, 1-Row, 12.3 sq-ft Face Area Condenser Fan
- DAIKIN packaged units are designed with an easier and faster installation in mind for both new construction and retrofit
- Our packaged rooftop units are built to be a direct replacement for most rooftop units on the field without the need of a curb adapter, to be able to replace the unit in a shorter time and at a lower cost
- DAIKIN packaged rooftop units are made with high quality galvanized steel with a powder-paint finish to provide higher corrosion resistance
- High performance, low noise scroll compressors, adjust the speed to match the required total cooling and heating load for efficient part load control
- The direct drive with airfoil single width, single inlet (SWSI) class II construction supply fan with aluminum fan and blades provides efficient and quiet operation at wide ranging static pressure and airflow requirements
- All units use large face area outdoor coils
- These coils are constructed with seamless copper tubes, mechanically bonded into aluminum plate-type fins with full drawn collars to completely cover the tubes for high operating efficiencies
- Packaged rooftop units come equipped with a well organized, large, easy-to-use weather-proof internal control box with easy access, for a better user experience
- Unit provides a draw through filter section as standard for better air quality and long-lasting component maintenance
- Wide range of electric heat selections effectively handle most comfort heating demand from morning warm-up control to full heat
- ETL listed electric heat is factory assembled, installed and tested
- Units are completely wired and tested at the factory to provide faster commissioning and start-up
| Additional Information |
: |
NPT Connection, 1122 rpm Speed, 23 FPI, 1-Row, 12.3 sq-ft Face Area Condenser Fan |
| Amperage Rating |
: |
33.7 A |
| CFM Rating |
: |
1570 cfm |
| Coil Rating |
: |
6.41 sq-ft |
| Compressor Type |
: |
Scroll |
| Connection Size |
: |
3/4 in |
| Cooling BTU Rating |
: |
47000 Btu/hr |
| Dimensions |
: |
39-7/8 in H x 74 in W x 48-5/16 in D |
| Drive Type |
: |
Direct |
| EER Rating |
: |
11 |
| Filter Size |
: |
20 x 25 x 2 in |
| Finish |
: |
Galvanized/Powder-Painted |
| Frequency Rating |
: |
60 Hz |
| Fuse Rating |
: |
50 A |
| HP Rating |
: |
1 hp |
| Material |
: |
Steel |
| Motor Type |
: |
Standard Static Direct Drive |
| Nominal Capacity |
: |
4 ton |
| Number of Stages |
: |
1 |
| Phase |
: |
1 ph |
| Refrigerant Type |
: |
R-410A |
| Rotational Speed |
: |
1200 rpm |
| SEER Rating |
: |
13.4 |
| Series |
: |
DFC Series |
| Voltage Rating |
: |
208/230 V |