The Kidde® Carbon Monoxide (CO) Alarms are sealed-in lithium battery devices that use electrochemical sensing technology to monitor CO levels. Each alarm automatically activates when it is attached to the mounting bracket, eliminating the need for pull tags or switches to activate the alarm. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. These alarms are suitable for all living areas.

Kidde® Carbon Monoxide Alarm

• Test/reset button tests the unit for proper operation and resets the carbon monoxide alarm
• Loud 85 dBA alarm alerts of deadly CO gas
• Low battery hush-silences low battery chirp warning for up to 12 hr in order to maintain protection without having to replace the batteries at an inconvenient time
• Two LEDs: red-illuminates when in alarm mode, green-AC power is present, normal operation
• Tamper resist feature-can be activated to cause unit to go into alarm if it has been unplugged or has come loose from the outlet
• 2 AA battery backup-provides continuous protection even during power outages
• Event memory-If the unit has detected CO concentrations of 100 mg/L or greater, the green LED will flash every 10 sec
• Battery pull tab-eliminates battery installation time
• Test/reset button tests the alarm electronics and resets the unit during alarm
• LED-green, normal, red alarm
• Audible alert 85 dBA at 10 ft, height 1-1/2in, humidity rating 10- 95% relative humidity non-condensing, length 4-1/2in, mounting type bracket, power supply 120 VAC, sensor type electrochemical, temperature rating 40 to 100 deg F, width 2-3/4 in