Leak lock is a state-of-the-art high-strength pipe joint sealant consisting of chemically resistant film formers, plasticers, reinforcing fillers and solvents. Leak lock can be used on all metal or plastic materials, including but not limited to, aluminum, aluminum alloys, cast irons, copper, copper alloys, (brass, bronze, etc.), magnesium and magnesium alloys, carbon steels, stainless steels, galvanized surfaces, PVC, CPVC, ABS, fiberglass, black polypropylene and kynar. Leak lock should be applied to threaded joints, flanged joints, gasket surfaces and all mating surfaces where a fluid-tight seal is required. Leak lock seals a broad range of chemicals including all refrigerants such as R-12, R-22, R-502, R-134A, etc., all CFC, HFC and HCFC refrigerants, petroleum products, natural and manufactured gases, steam, water, air, etc. No other sealant offers the application range of leak lock. Use alcohol as a cleansing solvent prior to setting.
Highside Chemicals Leak Lock Pipe Joint Sealant, 1.33 oz Net Content, Tube Container, Composition: Ethanol, Titanium Dioxide, Propylene-Glycol, Pourable Paste Form, Blue/Gray, Alcohol Odor/Scent, 24 hr Curing Time, 172 deg F Boiling Point, 61 deg F Flash Point, 59 hPa Vapor Pressure, Applicable Materials: Metal, Plastic, 10000 psi, -200 to 400 deg F
Applicable Materials | : | Metal and Plastic |
Boiling Point | : | 172 deg F |
Color | : | Blue/Gray |
Composition | : | Ethanol, Titanium Dioxide, Propylene Glycol |
Container Type | : | Tube |
Curing Time | : | 24 hr |
Flash Point | : | 61 deg F |
Form | : | Pourable Paste |
Net Content | : | 1.33 oz |
Odor/Scent | : | Alcohol |
Pressure Rating | : | 10000 psi |
Series | : | Leak Lock |
Temperature Rating | : | -200 to 400 deg F |
Vapor Pressure | : | 59 hPa |
Highside Chemicals