The Fluke® 116 Digital Multimeter has everything you need to help you quickly troubleshoot problems with HVAC equipment and flame sensors. With the ability to take temperature and microamp measurements, Fluke® 116 measures resistance, continuity, frequency and capacitance. Fluke® 116 multimeters are independently tested for safe use in CAT III 600 V Environments.

Fluke® Digital Multimeter, 600 mV, 6 - 600 VDC, 99.99 Hz - 50 MHz, 1000 nF - 1000 uF, 1 nF - 500 uF (Lo-Z Capacitance), 600 ohm - 40 Mohm, -40 to 400 deg C Temperature Measuring Range, 2 V Diode Test Range, 600 ohm Continuity Range Measuring Range, 9 V Alkaline Battery, 1% Plus 3 (DC, 45 - 500 Hz), 2% Plus 3 (500 Hz to 1 kHz) AC Voltage Accuracy, 0.5% of Reading Plus 2 Counts DC Voltage Accuracy Accuracy, (0.9% of Reading Plus 1 Counts) 600 ohm - 6 Mohm, (5% of Reading Plus 2 Counts) Accuracy, (1.9% of Reading Plus 2 Counts) 1000 nF - 1000 uF (5% of Reading Plus 20% of Reading) Greater than 1000 uF, (10% of Reading Plus 2 Counts Typical) Lo-Z Capacitance Accuracy, 1% of Reading Plus 10 Counts Accuracy, 0.1% of Reading + 2 Counts Frequency Accuracy, 0.9% of Reading Plus 2 Counts Diode Accuracy, -10 to 50 deg C, 167 mm L x 84 mm W x 46 mm D

• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• Resistance, continuity, frequency and capacitance
• Min/max/average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak)
• 600 V maximum voltage between any terminal and earth ground
• Surge protection - 6 kV peak per IEC 61010-1 600 V CAT III, pollution degree 2
• 6000 counts digital display, updates 4/sec
• Bar graph - 33 segments, updates 32/sec
• 400 hr typical battery life without backlight