fantech® Centrifugal In-Line Fan, 1.14 A, 120 V, 60 Hz, 119 W, 2550 rev/min Speed, 1 -Speed, 462 cu-ft/min, 8 in Duct, 13-3/8 in Dia Housing, 8 in Inlet, 8 in Dia Outlet, Class B Motor, Ball Bearing, 140 deg F, G90 Steel, Galvanized, 13-1/4 in L x 8-1/4 in H
- FG Series features new longer duct connections for easier installation
- Straight-through airflow allows fans to be installed at any angle at any point along the ductwork
- Performance, efficiency, reliability, air tightness, ease of installation
- Powered by ebm-PAPST external rotor motorized impeller for excellent heat dissipation, even at low rpm
- Permanently lubricated sealed ball bearings for maintenance-free operation
- Automatic reset thermal overload protection
- 100% speed controllable
- External rotor enclosure
- Fan shall be supplied with externally-mounted electrical terminal box with pre-wired terminal strip connections, capacitor shall be located within electric terminal box
- Motorized impeller shall be an external rotor type, class B insulation, enclosed with permanent split capacitor, motor shall be a permanently sealed self-lubricating ball bearing type
- Motor shall be acceptable for continuous-duty
- Fan wheel shall be of the backward inclined centrifugal type with a well designed inlet venturi for maximum performance
- Motorized impeller shall be both statically and dynamically balanced as one integral unit to provide for vibration free performance
- Includes-mounting bracket
- One-phase
Amperage Rating |
: |
1.14 A |
Bearing Type |
: |
Ball |
Dimensions |
: |
13-1/4 in L x 8-1/4 in H |
Duct Size |
: |
8 in |
Finish |
: |
Galvanized |
Flow Rate |
: |
462 cu-ft/min |
Frequency Rating |
: |
60 Hz |
Housing Diameter |
: |
13-3/8 in |
Inlet Size |
: |
8 in |
Material |
: |
G90 Steel |
Motor Type |
: |
Class B |
Number of Speeds |
: |
1 |
Outlet Size |
: |
8 in Dia |
Power Rating |
: |
119 W |
Speed Rating |
: |
2550 rev/min |
Temperature Rating |
: |
140 deg F |
Voltage Rating |
: |
120 V |