Polymer Adhesives Water Based Duct Sealant, 1 gal Net Content, Composition: 4.5 to 5.5% Chlorinated Paraffin, 1 to 1.5% Methanol, 0.1 to 1% Ammonium Hydroxide, <0.5% Titanium Dioxide, Paste Form, Gray, Slight Paint Odor/Scent, 24 to 48 hr Dry Time, 70 to 80 sq-ft/gal Coverage Area, 9.4 to 9.8 pH, 1.25 to 1.34 Specific Gravity, 100 deg C Boiling Point, 32 g/L VOC, 70000 to 80000 cPs Viscosity, Evaporation Rate: <1 %, 35 to 115 deg F Application/Storage, -40 to 200 deg F Service
Boiling Point | : | 100 deg C |
Color | : | Gray |
Composition | : | 4.5 - 5.5% Chlorinated Paraffin, 1 - 1.5% Methanol, 0.1 - 1% Ammonium Hydroxide, Less Than 0.5% Titanium Dioxide |
Coverage Area | : | 70 - 80 sq-ft/gal at 20 - 25 mil Wet Film Thick |
Dry Time | : | 24 - 48 hr |
Evaporation Rate | : | Less Than 1 |
Form | : | Paste |
Net Content | : | 1 gal |
Odor/Scent | : | Slight Paint |
Specific Gravity | : | 1.25 - 1.34 |
Temperature Rating | : | -40 to 200 deg F Service, 35 - 115 deg F Storage, Application |
VOC Content | : | 32 g/L |
Viscosity | : | 700 - 800 kcP |
pH Range | : | 9.4 - 9.8 |
Polymer Adhesives