EasyHeat™ AHB automatic electric water pipe heating cable is a preassembled and ready to install, cable that prevents metal and plastic pipes from freezing. These units are activated and de-activated by an integral energy saving thermostat. They are suitable for commercial and residential metal or plastic water supply pipes subject to freezing temperatures.

EasyHeat™ Pipe Heating Cable, 1-1/2 in Size, 120 VAC, 0.4 A Amperage Rating, 63 W Power, -40 deg F Temperature Rating, 9 ft L Dimensions

• Fixed resistance, pre-terminated, for commercial and residential applications
• Keeps water flowing at ambient temperatures down to -40 deg F (-40 deg C)
• Cables are rated at 7 W per 1 ft (0.3 m)
• Built-in thermostat turns on at +38 deg F (+3 deg C) or below and turns off at +45 deg F (+7 deg C) and above
• Plugs into a standard 120 VAC outlet, must be GFCI protected
• Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather-resistant PVC (high-low temperature) outer jacket
• Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in Dia
• Pre-assembled and ready to install
• Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
• Integral thermostat saves energy by powering the cable only when needed