RectorSeal® T Plus 2® is a non-hardening thread sealant containing PTFE plus synthetic fibers. These fibers are dispersed in a resinous base combined with inert mineral fillers to provide maximum sealing performance. Its low coefficient of friction allows tighter joint makeup with lower torque. It also breaks out easily without galling, seizing, or damaging threads. It is excellent for service where immediate pressurization is necessary. RectorSeal® T Plus 2® is non-toxic in accordance with NSF Standard 61. In addition, it is approved and listed with the Canadian Standards Association (CSA).
T PLUS 2® Pipe Thread Sealant, 0.25 pt Net Content, Can Container, Paste Form, White, Slight Odor/Scent, 1.32 Specific Gravity, >300 deg F Flash Point, 0 g/L VOC, 170000 cPs Viscosity, Applicable Materials: ABS, -40 to 125 deg F
Applicable Materials | : | Metal, Plastic Piping, Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Aluminum, Polyethylene, Reinforced Fiberglass, PVC, ABS and CPVC |
Base Type | : | Resinous |
Color | : | White |
Container Type | : | Can |
Coverage Area | : | 0.23 cu-ft |
Flash Point | : | Greater Than 300 deg F |
Form | : | Paste |
Net Content | : | 1/4 pt |
Odor/Scent | : | Slight |
Specific Gravity | : | 1.32 |
Temperature Rating | : | -40 to 125 deg F |
RectorSeal®