Johnson Controls Penn Temperature Control, Series: A70, 120/208/240/277 VAC, Switching Action: Open Low, 20 ft Capillary Length, Main: 16 A Full Load, 96 A Locked Rotor and 16 A Non-Inductive at 120 VAC, 9.2 A Full Load, 55.2 A Locked Rotor and 9.2 A Non-Inductive at 208 VAC, 8 A Full Load, 48 A Locked Rotor and 8 A Non-Inductive at 240 VAC, 7.2 A Non-Inductive at 277 VAC, Auxiliary: 6 A Full Load, 36 A Locked Rotor and 6 A Non-Inductive at 120 VAC, 3.4 A Full Load, 20.4 A Locked Rotor and 6 A Non-Inductive at 208 VAC, 3 A Full Load, 18 A Locked Rotor and 6 A Non-Inductive at 240 VAC, 6 A Non-Inductive at 277 VAC,125 V-A at 120 - 600 VAC , 57.5 V-A at 120 - 300 VDC Pilot Duty Contact, 5 deg F Differential, Temperature Settings: 15 - 55 deg F

• The A70 Series temperature control incorporates a vapor-charged sensing element
• The A70G has a 4-wire, 2-circuit contact block that contains 2-isolated sets of contacts
• The contacts are designed so that when the main contact opens, the auxiliary contact closes
• Long life, snap-acting contacts
• Automatic reset model
• The low cut-out stop is set and sealed at 35 deg F and it cannot be set lower
• The control responds only to the lowest temperature along any 14 - 16 in section of the entire 20 ft element
• 1/8 in OD capillary tubing
• 400 deg F maximum bulb temperature