Packless vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping. Packless vibration absorbers are recognized under the component programs of Underwriter's Laboratories for application on both suction and discharge lines. Packless vibration absorbers are compatible with all HFC, HCFC and CFC refrigerants. Packless vibration absorbers are constructed of deep pitch corrugated tubing for increased flexibility and vibration absorption, covered by high tensile wire braid for superior strength. The vibration absorbers have female copper end connections for making sweat connections to refrigerant piping. Each vibration absorber is pressure tested and then carefully vacuum tested using a highly sensitive helium mass spectrometer leak detection device. Units are cleaned, dehydrated and sealed in plastic film after final inspection to maintain cleanliness and dryness prior to installation. These are available either in bulk or individually boxed. Packless can customize the length and type of end connection for the vibration absorber to meet the individual needs of your application.

Packless Vibration Absorber, Model: VAF, OD, 9-3/4 in Length, Brass/Bronze/Copper, Additional Information: 7/8 in L Connection, 1/2 in ID Hose, 5/8 in Size, 8 in L Tubing, 620 psig Working Pressure

• The classic packless VAF models with a proven track record for quality and reliability
• The VAF standard sizes are produced from red brass flexible tubing and bronze braids while the large sizes use stainless stee