These two position (open/close) control actuators are used with VCZ 1000, 1100, 6000 and 6100 Series hydronic valves in a normal indoor environment to provide quick opening/closing to control the flow of hot and/or chilled water or glycol solution to 60% concentration. They are designed for on-off "zone" control of heating/cooling systems or to control individual fan coil, baseboard radiator or convector applications. Depending on the model selected, the actuator can be controlled by a low or line voltage SPST or SPDT controller, such as a room thermostat, aquastat or flow switch.

Honeywell Valve Actuator, 2.2 A, 24 VAC, 50/60 Hz, VA Rating: 6 VA, 5 ft Plenum-Rated Cable Electrical Connection, Lever Handle Operator, 0.4 in Stroke, 60 psi, IP40 Enclosure, Plastic Body, 0 to 60 deg C, 2.8 in H x 3.7 in W x 2.7 in D

• Double insulated actuator
• Quick and easy replacement of moving parts
• Actuator head installation does not require draining the system
• Selectable/switchable electronic fail safe normally open or normally closed
• Self-alignment shaft adapter
• SPST control signal