When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC® Molded Notch Belts. Our proprietary construction process provides a superior combination of flex and load-carrying capacity, transmitting up to 3X the horsepower versus comparably sized belts. Super HC® MN V-belts put more power where high speeds, high-speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts. Developed through specialized research, Super HC® MN is highly recommended for use on all industrial heavy-duty, narrow section V-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.

Gates® Super HC® V-Belt, Series: 9414 Series, 5VX Section, 88.02 in Outside Length, 0.59 in Top Width, 0.53 in Thickness, 41 deg Angle, Resists: Fatigue, Flexing Force, Shock, Tensile, Ethylene, -70 to 250 deg F, For Use With: Super HC® Sheaves

• Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly resistant to tensile and flexing forces, fatigue and shock loads
• Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves
• Molded notches reduce and evenly distribute thermal and bending stresses
• Machined belt edge provides maximum sheave-groove contact for even wear and extended belt life
• Proprietary Flex-Weave® cover protects the belt's interior from oil, contaminants and heat
• Promotes smoother, quieter operation, with less slippage and belt wear
• Elastomeric compound protects the belt against heat, ozone and sunlight
• Even with severe slippage, the belt will not catch fire from heat build-up
• Designed for high horsepower, space-constrained applications
• Improved belt life reducing expensive maintenance time
• Optimally constructed for small sheave diameter drives
• The molded notch pattern also reduces noise
• Patented ethylene material construction
• More compact design compared to classical section V-belts
• Cost and space savings by reducing size of pulleys, bearings, guards and mounts
• All sizes meet Gates® UNISET tolerances, they can be installed without matching
• Static conductive (ISO 1813) and can as such be used in the conditions described in the directive 2014/34/EU-ATEX