Pipe-Dri is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines and other cold surfaces. Quickly adheres and dries to a hard water-proof coating. Pipe-Dri's spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas. This product is ideal for providing a moisture barrier for refrigeration and air conditioning lines and cold water pipes, etc. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of one inch water pipe or eight square feet of flat surface area with two coats.

Nu-Calgon Pipe-Dri® Cold Pipe Insulation Spray, 14 oz Net Content, Can Container, Aerosol Form, White, Petroleum Odor/Scent, Composition: US GHS The Exact Percentage (Concentration) of Composition has been Withheld as a Trade Secret in Accordance with Paragraph, 0.726 Specific Gravity, 25 cPs Viscosity

• Refrigeration lines
• Air conditioning lines
• Cold water lines
• Other cold surfaces
• Wipe excess dirt and moisture from surface to be sprayed
• Shake can well and remove protective cap
• Hold can upright about 12 in from surface with valve opening pointed away, apply a thin first coat
• Allow to dry (5 to 10 min), if second coat is needed, reapply from a distance of 6 to 10 in
• Invert can and spray for 1 to 2 sec to clean nozzle