Mortex™ G18D070CA4BC High Efficiency Gas Furnace, 70000 Btu/hr Input BTU, 115 V, 1700 cfm, 3/4 hp, 80 % AFUE, Downflow
- Item ID: G18D070CA4BC
- Min. Order Qty: 1
- Item ID: G18D070CA4BC
- Brand: Mortex™
-
-
Mortex™ High Efficiency Gas Furnace, Series: G18D Series, 70000 Btu/hr Input BTU, 56000 Btu/hr Output BTU, 115 V, 6.7 A, 1700 cfm CFM Rating, 3/4 hp, 80 % AFUE, 1 Phase, 60 Hz, Downflow, 10 x 8 in Blower, 51.85 in H x 23.82 in W x 19.75 in D Cabinet Dimensions, 5 ton Tonnage, Hot Surface Ignition System, Aluminized Steel, 40 to 75 deg F Temperature Rise
- Sealed combustion system - safe and more efficient because no indoor air is used for combustion
- A/C ready - 2-5T ac capacity
- FER compliant ECM constant torque blowers
- Twin throw away filters clear the air effectively - standard types are available everywhere
- High efficiency drum heat exchanger - made of 20 ga aluminized steel for extra long service life
- Aluminized steel heat transfer tubes - extract more heat from the flue gas to provide heating comfort for fewer dollars
- Solid state integrated control board - monitors flame, start up and shut down of blower, improving efficiency
- Boost combustion blower - provides a consistent and stable flow of air to the burner and is unaffected by outside conditions
- Appliance white doors - modern design, round corners and plastic caps provide an appealing, modern appearance
- Hot surface ignition system - used with high efficiency 80 AFUE models
- Full insulated cabinet - fiberglass with reflective foil makes for quiet and efficient operation and minimizes heat loss
- Built-in coil compartment handles coils for add on ac system up to 5 tons
- Four-way duct connector - unique design provides alignment flexibility and makes a leak-free gasketed connection to all manufactured home supply ducts
- Monoport burner - uses stainless steel and sintered metal for exceptional burner efficiency and long service life
- Mortex™ furnaces fit virtually anywhere - whether it's a new factory built home or a replacement for an older furnace, models are available with just the features needed ensuring that a cost-effective installation will be made
| AFUE Rating | : | 80 % |
| Amperage Rating | : | 6.7 A |
| BTU/H | : | 70000 |
| Blower Size | : | 10 x 8 in |
| CFM Rating | : | 1700 cfm |
| Cabinet Dimensions | : | 51.85 in H x 23.82 in W x 19.75 in D |
| Configuration | : | Downflow |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 3/4 hp |
| Ignition System | : | Hot Surface |
| Input BTU Rating | : | 70000 Btu/hr |
| Item Name | : | G18D |
| Material | : | Aluminized Steel |
| Motor Type | : | ECM MOTOR |
| Number of Stages | : | SINGLE STAGE |
| Output BTU Rating | : | 56000 Btu/hr |
| Phase | : | 1 ph |
| Series | : | G18D Series |
| Speed | : | MULTI SPEED |
| Temperature Rise | : | 40 to 75 deg F |
| Tonnage | : | 5 ton |
| Type | : | RESIDENTIAL |
| Voltage Rating | : | 115 V |
Mortex™ G18D070CA4BC