Oatey® FlowGuard Gold® all weather CPVC cement with UV indicator is recommended for cold water systems and hot water systems up to 200 deg F/93 deg C. Its UV indicator allows for quick and easy inspection of dry fit joints using any ultraviolet light source. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in Dia with interference fit. Oatey® products have earned the trust of plumbing professionals for over 100 years.

Oatey® FlowGuard Gold® All Weather Cement, 8 oz Net Content, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Liquid Form, Gold/Yellow, Solvent Odor/Scent, 0.94 Specific Gravity, <490 g/L VOC, 500 to 1500 cPs Viscosity, 2.5 Vapor Density, 145 mmHg Vapor Pressure, Applicable Materials: CPVC, 2 years Shelf Life, Water, Flammability Limit: 1.8 to 11.8 %, Evaporation Rate: 5.5 to 8 %, 0 to 115 deg F

• All weather yellow cement solvent welds CPVC, dauber included
• For cold and hot water systems up to 200 deg F
• Allows for quick, easy inspection of dry fit joints with UV light
• Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in Dia with interference fit
• Approved for use with FlowGuard Gold® piping systems (registered trademark of Lubrizol Corporation)
• No primer needed where local codes permit
• Low VOC solvent cement that meets California South Coast air quality management districts (SCAQMD) 1168/316A or BAAQMD method 40 requirements, meets ASTM standard F493 and complies with NSF/ANSI 61 health effects requirements